|
Specifications
| Defibrillator |
| Waveform |
Rectilinear Biphasic |
| Defibrillator Charge Hold Time |
30 seconds |
| Energy Selection |
Automatic preprogrammed selection |
| Patient Safety |
All patient connections are electrically
isolated |
| Charge Time |
Less than 10 seconds with new batteries |
| Electrodes |
ZOLL CPR-D padz or stat padz II |
| CPR: Metronome Rate |
Variable 60 to 100 CPM |
| Depth |
1/2" to 3" |
| Defibrillator |
Protected ECG Circuitry |
| Display Format |
Optional LCD with Moving Bar |
| Size |
2.6" x 1.3" |
| Viewing Time |
2.6 seconds |
| Display Sweep Speed |
25 mm/sec; 1"/sec |
| Battery Capacity |
Typical new (20°C) = 5 years (300
shocks) or 1.5 hours continuous Monitoring/Defibrillation. |
| PC Min. Requirements:
Windows® 98, Windows® 2000, Windows®NT,
Windows® XP, IBM-compatible PII with
16550 UART (or higher) computer. 64MB RAM.
VGA monitor or better. CD-ROM drive. IrDA
port. 2MB disk space. |
| Defibrillation Advisory:
Evaluates electrode connection and patient
ECG to determine if defibrillation is required.
Shockable Rhythms: Ventricular fibrillation
with average amplitude >100 microvolts
and wide complex ventricular tachycardia
with rates greater than 150 BPM. For ECG
Analysis Algorithm Accuracy for sensitivity
and specificity performance, refer to AED
Plus Administrator's Guide. |
| Device |
| Size |
(H x W x D) 5.25"x 9.50"
x 11.50" |
| Weight |
6.7 lbs. |
| Power |
User Replaceable Batteries. 10 -Type 123A
Photo Flash lithium manganese dioxide batteries. |
| Device Classification |
Class II and internally powered per EN60601-1 |
| Design Standards |
Meets applicable requirements of UL 2601,
AAMI DF-39, IEC 601-2-4, EN60601-1, IEC60601-1-2. |
| Environment |
| Operating Temperature |
PS Model: 32. to 122.F; 0.
to 50.C
PA Model: 50. to 104.F; 10. to 40.C |
Storage
Temperature |
PS Model: -22. to 158.F; -30. to 70.C
PA Model: 32. to 122.F; 0. to 50.C |
| Humidity |
10 to 95% relative humidity, non-condensing |
| Vibration |
MIL Std. 810F, Min. Helicopter Test |
| Shock |
PS Model: IEC 68-2-27; 100G
PA Model: IEC 68-2-27; 50G |
| Altitude |
PS Model: -300 to 15,000 ft.; -91m to
4573m;
PA Model: -300 to 7,500 ft.; -91m to 2287m |
| Particle and Water Ingres
IP-55 |
| CPR-D
Padz |
| Shelf Life |
4 Years |
| Conductive Gel |
Polymer Hydrogel |
| Conductive Element |
Tin |
| Packaging |
Multilayer foil laminate pouch |
| Impedance Class |
Low |
| Cable Length |
36 in (91 cm) |
| Sternum: Length: 6.1
in (15.5 cm); Width: 5.0 in (12.7 cm); Length,
conductive gel: 3.5 in (8.9 cm); Width,
conductive gel: 3.5 in (8.9 cm); Area,
conductive gel: 12.3 sq in (79.0 sq
cm) |
| Apex: Length: 6.1 in
(15.5 cm); Width: 5.6 in (14.1 cm); Length,
conductive gel: 3.5 in (8.9 cm); Width,
conductive gel: 3.5 in (8.9 cm); Area,
conductive gel: 12.3 sq in (79.0 sq
cm) |
| Complete Assembly |
Folded Length: 7.6 in (19.4 cm); Folded
width: 7.0 in
(17.8 cm); Folded height: 1.5 in (3.8 cm) |
| Design Standards |
Meets applicable requirements of ANSI/AAMI/ISO
DF-39-1993. |
|
